The 6.5 ULTRA 9 is our full-size precision rifle suppressor for 6.5mm calibers. It is best for applications where maximum suppression is key. The 6.5 mm caliber version optimizes suppression performance on 6.5 mm and smaller calibers.
The 6.5 ULTRA 9 will suppress a typical .260 REM bolt-action rifle down to approx 129-131 dB1. It also has very little or no "first round pop" (FRP) in most applications. When shot on a .260 Remington or 6.5 Creedmoor, the 6.5 mm Ultra is 2-3 dB quieter than the .30 caliber Ultra on the same rifle.
The CB mount and direct thread mount have equivalent accuracy and repeatability.
With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the ULTRA suppressors use a heat-treated 17-4 thread insert and initial blast shield. The ULTRA series suppressors also have the flexibility to be changed from direct thread to CB mount and vice versa via a simple factory service operation, in case your needs change. This is accomplished by removing or replacing the default brake from the direct thread version.
The ULTRA series is constructed of titanium with a fully-welded core. This material and construction provide a great strength to weight ratio.
The 6.5 ULTRA was designed around .260 REM / 6.5 Creedmoor for maximum flexibility and is rated up to 6.5 SAUM ((20" barrel), but it's the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua, 6.5-284 Norma, etc.
-Direct thread attachment option
-CB series muzzle brake and flash hider attachment option
-Ionbond DLC coating on CB muzzle devices
-Conical shoulder surface on CB mount
-100% titanium construction
-360-degree fully-welded baffle core
-Helical Baffle Technology
-Rock-Solid POI Repeatability
*Minimum barrel lengths2:
.223 Rem, 5.56, 6.5 Grendel: 11.5" *
.260 REM, 6.5 Creedmoor: 16"" *
6.5 SAUM: 20"
Calibers 6.5 mm caliber, up to 6.5 mm / .264" caliber
Length 9 inches
Diameter 1.5 inches
Mounts CB series brake or flash hider, and Direct Thread
Weight 11.9 ounces (CB mount) 13.7 ounces (direct thread)
Threads (Brake or Direct Thread) 1/2-28*, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 brake has part number 223CB-BRK:1/2-28 and has a .223 caliber aperture!
Finish; Black CeraKote; OD Green or FDE available
Brake Material; Heat-treated 17-4 stainless
Brake Finish; Ionbond DLC
Use; Precision/Long-range rifle, bolt or semi-auto